How Do Pocket Watches Work

The traditional pocket watch got developed during the 16th century. They were the most popular type of watch that got used until World War I when wrist watches replaced these. However, they are still used quite frequently by many people though and when owning one it is best for you as an owner to know exactly how they operate and function. The first thing that you should know is that pocket watches work with five different main components that are used to make the whole device work. These are the face of the clock, the balancing wheel, the main spring, gear strain, and the escapement mechanism. These five simple parts work together to effectively tell the time on the pocket watch. The pocket watch first gets wound either daily or every other day as recommended to avoid causing damage to the device. When the winding occurs compression occurs on the mainspring. These two work to create the energy that keeps the watch in motion. Then the main spring is connected to the gear teeth via a cylindrical barrel. The gear train is turned by the gear teeth. The four wheels which are separate get attached to each other by the gear teeth as well. The center wheel and barrel also get attached to one another. In the center the wheel is attached to the escapement mechanism which is heard about at the beginning which explains the five distinct parts which make up a pocket watch. The escapement mechanism is something that sounds complicated but it simply is a pendulum that rocks back and forth in either direction as the center wheel is being rotated. This pendulum or escapement mechanism is connected to the wheel flying shark on one end by a pin that is positioned upright. This pin is located on the balance wheel itself. This part of the mechanics is what keeps the time because the balance wheel keeps moving in a regular interval. This regular movement is made possible by the escapement mechanism. The balance wheel is also connected to the minute wheel through a cannon pin. This and the hourly wheel are joined together because a gear is connected in a ratio of 12-1, which allows the proper hour in time to be kept by the movements. Every time the minute wheel is moved 12 times the hour advances by S107 RC helicopter one. This is how the ratios function together. The watch hands are connected with shafts which allow them to be viewed through the clock face. Although not every single pocket watch is going to be made exactly the same this is the basic makeup for each of the pocket watches that are created. This applies to ones that are created now and back when they were first introduced during the 16th century. This ensures that the functions of the pocket watch are kept intact and work how they should. Every individual should know how their devices work. This means all electronics and simple devices such as pocket watches and wrist S107 helicopter watches too.